CircuitCity.com is now TigerDirect.com Click here for details.
INSTEON Wireless Motion Sensor
Price: $3499
Add to cart
  1. Limit 4 per customer Add to cart
  2. Save to wishlist

  3. TigerDirect Retail Store

    Select another store

INSTEON Wireless Motion Sensor - Up to 150ft from Nearest Access Point - 2842-222

Item#:  XMA-101801225  | Model#: 2842-222
List Price:
$44.99
Instant Savings:
- $10.00  (22%)
Price:
$34.99
Available in:Open_Close  Motion  Water Detection 
Shipping:
In Stock (Details)

Additional Resources

INSTEON Wireless Motion Sensor Product Details

Motion Sensor Wireless

Wireless INSTEON Motion and Occupancy Sensor
Save valuable energy and be eco-friendly with the Wireless Insteon Motion and Occupancy Sensor. This sensor helps you to automatically switch ON your lights and other appliances when you enter a room, laundry or garage and also switches OFF the appliances when you leave. You just need to link this sensor to a wall switch, plug-in lamps or appliances and the rest is done. Set your thermostat to your favorite comfort level and link it to this sensor and your thermostat starts working as soon as you enter your home. Also, you can set the motion sensitivity for flexible placement and optional night only mode allows you to keep your lights OFF during daytime. Purchase the great energy saver- Wireless Insteon Motion and Occupancy Sensor right now!

What It Is And Why You Need It:

  • Dusk / Dawn Sensor; makes sure that your porch light is OFF during dawn and ON during dusk
  • Paintable; the sensor is paintable and hence matches perfectly with your home décor
  • Low battery warning; notifies you in the form of LED flash when the batteries are low
  • Mounting bracket and 2 mounting screws included in the package; ensures ease of installation

Note: Requires Insteon Controller

  Overview

  • Automatically turns on INSTEON-controlled lights or appliances when motion is detected
  • Automatically turns off after motion stops (adjustable anywhere between 30 seconds and 2 hours)
  • Optional night-only mode keeps lights from turning on during the day
  • Adjustable high/low motion sensitivity provides flexible placement
  • Adjustable day/night threshold
  • Optional dusk/dawn lighting control using a built-in photocell
  • Excellent range - up to 150' from nearest Access Point or other dual-band product
  • Award-winning INSTEON technology provides superior performance and reliability

Essential Info
Turn on your INSTEON-controlled lights or appliances when you enter the room and turn them off after you've left. Truly automating your lighting, this motion sensor is perfect for areas of your home such as the laundry room, closets and the garage where lights commonly get left on. Use this motion sensor for indoor or outdoor applications, and link it to a wall switch, plug-in lamps or appliances. You can even have the motion sensor trigger your thermostat to a favorite comfort level when you enter your home or any room in your house.

Additional features include an adjustable 'Off' countdown timer delay, night-only mode with adjustable light sensitivity settings, adjustable motion sensitivity, wireless range of up to 150', 40-foot field of vision and a pivoting mounting bracket. INSTEON Wireless Motion sensor is a must-have for any INSTEON home automation network as an addition that will make your life more convenient, fun and energy-efficient. A 9 Volt battery is required and included.

Please note that 2842-222 is the new product number of 2420M. The product and functionality are the same.

Required Accessory
Since the motion sensor only transmits RF signals, your home must have at least one Access Point or other dual-band product to interpret the command for controlling powerline only devices.

How It Works
When the sensor detects motion it sends a wireless RF signal to the nearest Access Point or other dual-band product (sold separately) which in turn relays the signal over your existing power wires to turn on linked devices such as lamps or wall switches. After a selectable time of no motion, the sensor turns those same lights (or appliances) off.

The motion sensor also features a secondary dusk / dawn control feature that is accessible with computer controllers such as HouseLinc or ISY-99. It allows you to set a device or group of devices to activate when the photocell detects a change in light or dark conditions for more than 3.5 minutes. Great for automatically controlling landscape lighting and more.

Optional Power Supply
A Plug-In 9-Volt Power Supply (Battery Eliminator) can be used in place of a 9 Volt battery, eliminating the cost and trouble of regularly replacing the battery. To install, just notch a small hole using a file or shear on the Motion Sensor battery door (for the power supply wire) and plug it in.

Note About PIR Sensors
As with all PIR (Passive Infrared) motion sensors, there are certain factors which can cause detection range / reliability to vary. Because PIR sensors rely on changes in heat to detect motion, be aware of the following factors that can effect PIR reliability when choosing a location to mount your INSTEON Motion Sensor:

  • Rapid environmental changes
  • Direct sunlight
  • Direct wind from a heater or A/C
  • Fireplaces

  • Also, please note that certain types of treated glass may or may not act as an infrared 'wall' through which a motion sensor can detect. If you want to detect motion through glass, we recommend you test it in your particular application. Note: Any accumulation of ice, snow or dirt on the Fresnel lens may also interfere with the motion sensor’s ability to detect motion.


      More Info


    Never Leave Another Light On Again

    INSTEON Wireless Motion Sensor is a great energy-saver: Your lights will turn on when you enter and automatically turn off after you leave, so you’ll never have to worry about leaving your lights on. Also, INSTEON Wireless Motion Sensor has a built-in photocell, so it can be disabled during the day. If daylight is enough to light your house during the day, Motion Sensor can leave the lights off, even when motion is detected. Using Motion Sensor to limit the amount of time lights are on, is a great first step towards saving energy and protecting the environment.

    Unlock More Motion Sensor Options with HouseLinc
    Get HouseLinc and you'll be able to make adjustments to the INSTEON Wireless Motion Sensor without having to touch it again. These adjustments include:

    • Delay - Change the Off duration to anywhere between 30 seconds up to 2 hours.
    • Indicator Intensity - Controls the LED indicator brightness. This is good when you have the motion sensor in a bedroom and don't want the distraction of the red LED when it's being activated.
    • Ambient Light - Adjust the sensitivity of the motion sensors photocell (light sensor). This allows you to set the amount of light the motion sensor is required to see before transmitting a command.

    Dusk / Dawn Photocell Sensor
    Save energy by ensuring lights are off at dawn or turn your porch lights on at dusk with INSTEON Motion Sensor's dusk / dawn feature. When used with supported INSTEON software or an INSTEON automation controller, Motion Sensor can also be used as a dusk/dawn sensor. After it has been bright for 3 and a half minutes, Motion Sensor will send an Off command for its 'Group 2', which can be used to turn off lights and appliances or trigger a software event. Conversely, it will send an On command after it has been dark for 3 and a half minutes.

    Low Battery Warning
    Get notified when it's time to change the battery. INSTEON Motion Sensor has 2 methods of indicating the battery life is low:

    • LED double-flashes after motion is detected (even if LED is disabled)
    • On command is sent to 'Group 3', which can be utilized with INSTEON software or an INSTEON automation controller

    For extended battery life, consider purchasing a 9V Lithium battery which can extend battery life by 4 times.

    If you have a need for the motion sensor to activate many links, using HouseLinc, ISY-99 or other INSTEON computer controller that supports this product can extend battery life.

    Paintable
    Motion Sensor has been manufactured with a surface that can be painted to blend in with your home décor. This gives you the ability to decide exactly what color will give your motion sensor installation that professional finished look. Please note, it is recommended that you protect the Fresnel lens during the painting process. Any excess paint or residue may cause motion sensor to operate improperly.

     

    Product Tags

    insteon
    • Manufactured by: Insteon
      Warranty provided by: Insteon
      Limited Warranty: 24 months parts; 24 months labor
      Mfg Part No: 2842-222
      UPC No: 718122388714
      Box Size: ( Length:7, Width:7, Depth:2)
      Shipping Weight: 3.1500 pound(s)
      Click here for full warranty and support information
    • Limited Warranty: A full text version of the limited warranty may be obtained by mailing a self addressed, stamped envelope to the address below and requesting the warranty for item number: XMA-101801225

      TigerDirect.com
      Warranty Information
      7795 W. Flagler St. Suite 35
      Miami, FL. 33144

    • Insteon logos are registered trademarks of Insteon. All others trademarks and copyrights mentioned herein are the property of their respective owners.