Corsair Hydro Series CW-9060009-WW H100i Extreme Liquid/Water CPU Cooler - 2 x 120mm Fan, Multi-socket Support, built-in Corsair LinkItem#: C13-2101  |  Model#: CW-9060009-WW

Good cooler, really loud

I bought this to overclock my AMD FX-6100 (my first build) and it's really loud. It won't show up on Corsair link and it's really annoying, and 2 of the long screws wouldn't work when I mounted the fans onto the radiator. But after all the trouble and noise this thing performs well, so I gave it a 5 in performance. But seriously, I thought this thing was supposed to be quiet!!!

excellent for the Intel LGA 2011 CPU's here

two suggestions; 1 - for the mfg? offer an optional kit to extend the length of the coolant lines. sometimes, the standard lines aren't really long enough to allow the builder to place the Corsair unit in the ideal position. 2 - for the assembler builder? I suggest you consider plugging in all the small control wires BEFORE you connect the cooler block to your CPU die. reason? the plugs go into the cooling block on the sides of the block and are virtually hidden from a top view or inspection perspective. I've had to resort to medical angle mirrors and micro led lights to see where the plugs were, and orient the small control wire plugs the correct way. I do this now on all Corsair coolers.

Awesome Water Cooler

I bought this All-In-One Water Cooler for my first build to cool the Intel Core i5 3570K. I have not overclocked yet and the Corsair Link software as well as the MSI Click Bios show the CPU temp at 27 degree Celsius. The Water Cooler was easy to mount in my case and it works without problems.

Good non-custom water solution

I bought this to cool an Intel i7 3930k for my new build until I could afford a custom water loop and I am fairly happy with the results. At stock speed, my 3930k was kept in the mid-50s (celsius) while running a few hours of prime95 blend torture test. After overclocking my CPU to 4.25Ghz, the H100i was still able to keep up and kept temperatures in the mid- to high-60s during prime95. The only problems I noticed were that Corsair Link caused BSOD when used with my Asus Rampage IV Extreme. To work around this, I just used Corsair Link to set my fan speed and then deleted Corsair Link from my computer and pulled the internal USB cable. No more BSOD and a USB header being put to better use. The Hydro series by Corsair is a great entry-level water cooling system for those who aren't too sure about doing their own loops but for people like me, they are only a stopping off point to true water cooling.

Even better than gen 1

I had the first generation model of this in a previous build and this version is even better. I have an environment that is very hot, so controlling internal temps is a challenge, and with this solution, I've never had a problem. Frankly can't imagine going back to a standard cooler, this one is so quiet.

Never regret getting this

This was my first LCS and i will never go back to fans only again! only problem with this is that the book says the fans come with an arrow indicating air flow directions however there is no arrow. 1 8 minute call to corsair was all it took. SUPER QUIET, MAX COOLING

Good product good price

Easy to install and keeps temps of i7-3770k around 40-50 degrees C under load, and less than 25 at idle. My only issue is that Corsair Link does not officially support Windows 8, but it still functions adequately.

Works better than an air cooler

I have this hooked up to my FX-8350. Overclocked to 4.72ghz it idles at 35c under Prime95 stress test it peaks around 62c. With my previous aftermarket air cooler I couldn't get these temps even at stock 4.0ghz clock I like this cooler a lot, but it only comes with just enough screws to do a push or a pull fan configuration, not both. You'll have to order more from their website. The corsair link software included is a bit buggy, often crashing to the desktop, I hope they will patch it soon. I really wish I would have checked their site first before buying this, because they have an even more awesome LARGER H110 version of this that uses 140mm fans and its only TEN BUCKS more than this one. Check it out before you settle on this one.

Cool and QAuiet

Easy to install. Had to figure out which way the air flows. It is quiet and I like the room it leaves in the case (Cooler Master HAF 932).

Also Much Impressed !

I installed the H100i in a Corsair 500R Case and fit very nicely. All hookups are easy to set. My AMD 8150 is running 20c+ cooler under load now. My only beef with this product is the buggy Thermal Link software that does not work 100% right it reports the CPU temp as a crazy 7c. Corsair Tech told me is a bug with it and AMD 990 chips and they will address it in the future. In the mean time it needs to be monitored in another way.