NEC NP41 2300 Lumens XGA DLP Portable Projector
The body weight has been reduced by introducing magnesium housing and employing a new cooling method combining a fan and a small-sized pump which has been developed by NEC. This projector achieves the weight of 1.6 kg with the high brightness 2300 ANSI lumens, including a built-in speaker that was not available on the previous model.

With the auto focus function, the projector can be set up easily and quickly.
1.Insert the power cord into the outlet.
2.Set the projector in the proper position.
3.Start projecting images by automatically adjusting the focus and correcting any trapezoidal distortion.

Auto power on
By inserting the power cord into an outlet, projection will start immediately without pressing the power button. If the initial input selection is set to Auto, simply by turning on the power, the projector automatically judges the input signal and projects the images.

Auto focus
When turning on the power, adjusting the zoom operation, or removing the main unit, the focus sensor measures the distance between the projector and the screen and adjusts the focus of the projected images automatically.

Auto Vertical Keystone Correction
If the projector is installed at an angle to project images on a screen, it may result in trapezoidal distortion of the projected images. In this case, the acceleration sensor built into the main unit senses the inclination of the unit in the vertical direction and then corrects for any trapezoidal distortion in the projected images automatically to project square images. (+/- 40 degrees from the projection angle).