Thermaltake CLW0216 Water 2.0 Pro CPU Liquid Cooler - 4-Pin, Multi-Socket, 1200 ~ 2000RPM, 81.32CFM, 27.36 dBA, 0.5A, 2x 120mm PWM FansItem#: T925-8048  |  Model#: CLW0216

Well worth the money

Bought this as part of a new upgrade, have an intel pentium dual core OC'ed to 4.00ghz from 2.2ghz, under max load went from 78c to 38c. had to fiddle around with the mounts for my LGA775 socket but in the end it is well worth. I higly reccommend this for anyone who like to OC their processors or like to play graphic intensive games

Great CPU Cooler

It made a huge difference going to this from my stock AMD heatsink. I'm running fx 8350 at 4.2ghz and with the stock heatsink under full load I was going over 65c on the core. Now my core stays at 40c max at full load with prime95 and 1866mhz memory.

Hace lo que promete

Desde que salieron al Mercado los enfriadores de agua, siempre queria probar uno, pero era mas que necesario usar laptop, hasta que me anime por armar una Pc de escritorio y queria un enfriador de agua, por fin lo logre y no me desepciono... pero recomendaria comprar el que es mas largo y Delgado, este ocupa mucho espacio y es necesario un gabinete grande si no quieres problemas por el espacio

water cooler

works ok this item needs more work. I have an 8 core cpu 3.60. I think it should run cooler 45 c under normal condition. under load it runs about 178 f with 5 case fans.

Great Product!

Bought this about 2 days ago. I had a stock fan on my computer and it was getting loud and seemed louder everyday. Replaced with this, and I barely can tell if my computer is on anymore. Stock fan Temp was 50C. Now normal use its around 34C and while gaming its not above 40C. Install was simple as long as you read the directions. It did take about 30 minutes but was still easy.

Very good

20c at idle on my fx-8120 at 4.2ghz and 44c at load, works perfect. The only problem with mine is that the pump makes a high pitch squeel at load but you cant hear it over the fans unless you lower the rpm. The fans are a little loud but thats not a problem for me.

CPU is running cool

Installed easily and accomodated my case configuration nicely. Had to install radiator and fans on left side panel due to case design but works very well. Have about 8 fans throughout case and motherboard running in this system so with no overclocking and a moderate workload CPU temp hovers on the low side of 30 degrees C. Very happy so far with performance

Does what it is supposed to do

The installation was not difficult as some have stated (the instruction manual is short and sweet). Also, the quality is very good. The temperature of my overclocked i7 920 is fairly low, after being on for days and multiple gaming sessions the max temp was 50 C but it generally operates around 46 C. I would buy this product again.

Very Nice!

Kept my cpu at a very comfortable 31c idle and 51c-55c under full load (i-5 3570k at 4.4ghz.) A little tricky to get the water lug mounted because water hoses make it hard to set lug on cpu square without adjusting. Still good temps even after failed first attempt(will remove and apply arctic silver so that i know my coverage is proper, hoping for even better temp later) ran prime94 full load for aprox an hour with temp running solid 54c (just gave up for testing any longer bc there just wasnt any fluctuation in temp) only thing I didnt like was the pre applied thermal paste to the water lug, would have rather applied it to the cpu myself. Overall this is a VERY EFFECTIVE and extremly...let me say agian...extremly QUIET cooler

APU WORKS GREAT

Over clocking and 66 degrees and dropping to 43. GPU is 40 degrees. they drop even more with house air on. Fits in 4u rack box just right. could use software like on the other model. this one has the bigger radiator.