Atlona AT-HD-IR40SR HDMI v1.3 Extender over 2 CAT5e Cables with IR up to 200ftItem#: A85-1149  |  Model#: AT-HD-IR40SR

Atlona AT-HD-IR40SR HDMI v1.3 Extender over 2 CAT5e Cables with IR up to 200ft
The AT-HD-IR40SR HDMI Extender over 2xCat5/Cat6 with IR boosts up your video/audio transmission distance up to 60m / 200ft in HDTV 720p/1080i or 130ft at 1080p format. With two low cost CAT-5/5e/6 cables, users can extend HDTV sources to distant displays without any type of degradation. The Atlona AT-HD-IR40SR is featured with embedded IR input and output so that the user can control the source via remote even if the source is not located within remote range.

Specifications

• Video Bandwidth: 10.2Gbps (HDMI 1.3a)
• Input connector:
  Transmitter: 1x female HDMI connector
  Receiver: 2x RJ-45
  1x IR Receiver Socket
  
• Output connector:
  Transmitter: 2x RJ-45
  Receiver: 1x female HDMI connector
  1x IR Sender Socket
  
• RJ-45 Connector: 2 indication LEDs
• Dimensions: 70mm x 60mm x 25mm / 2.8”x2.4”x1” (L x W x H)
• Weight: 3LB (sender and receiver)
• Power Supply: 5V 4A

Features

• HDMI 1.3a compliant
• Extend the transmission distance up to 60m / 200ft from the sources at 1080i or 720p
• Extend the transmission distance up to 40m /130ft from the sources at 1080p
• Provides independent DDC channel, fully HDCP compliant
• Power supply is only required for the receiver unit (sender unit is using power from HDMI source)
• Minimize the cable skew by adjustable 8-level equalization knob
• Extending IR signal from the source to the display (comes with 3ft IR extenders cables)