APC H10 Features

• Automatic Voltage Regulation (AVR)
  Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
• Surge Protection
  The H10 Power Conditioner provides a high level of surge protection for the voltage going into the unit, thus protecting the devices connected to the unit. Additionally, surge protected coax/radio frequency (RF) connectors are protected against surges traveling over coaxial lines to protect your digital satellite system (DSS), CATV box, or cable modem. Similarly, the telephone line surge protection feature provides a protected splitter to allow output to a telephone, modem, Digital Subscriber Line (DSL) modem, fax, digital video recorder (DVR), DSS system, set-top internet service provider (such as WebTV), or pay-per-view cable TV function.
• Isolated Noise Filter Banks (INFB)
  The H10 also provides INFB technology to eliminate electromagnetic and radio frequency interference that can negatively impact sound and video quality.
• DC Trigger
  When connected to a component acting as a DC trigger, that component controls the turning on/off of the ‘delayed’ outlet banks. The H10 also allows that DC signal to pass through to another connected component.
• Building wiring fault
  This indicator LED informs users of potentially dangerous wiring problems in the wall circuit. The H10 is unique in that it provides AVR, which is engaged to correct low and high voltage conditions. In doing so, all equipment connected to the H10 are protected against these undesired voltage fluctuations, thus, prolonging the life of the equipment.
• IEEE let-through rating and UL 1449 compliance - The 'Institute of Electrical and Electronics Engineers' (IEEE) Let-Through Voltage rating is based on a test that subjects a Surge Protector to a 6,000 volt spike. The rating equates to the amount of excess voltage that reaches connected equipment. The lower the number, the better the performance of the Surge Protector is. Underwriter's Laboratory's UL1449 surge protection safety standard uses these ratings to help users gauge performance. UL's best Transient Voltage Surge Suppressor (TVSS) Let-Through Voltage rating is "300V".
• Lightning and Surge Protection - To prevent damage to your equipment from power surges and spikes.
• Noise Filtering - Surge Protector attenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.
• Overload Indicator - Indicator illuminates when connected equipment draws more power than unit’s capacity. To remedy the condition, unplug less vital equipment.
• Phone Line Splitter - Allows use of two pieces of equipment at once, such as a modem and phone.
• Protection Working Indicator - SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.
• Resettable circuit breaker - Easy recovery from overloads; no need to replace a fuse.
• Right Angle Plug - Plug angle allows for equipment and furniture to be placed closer to the wall than with a standard power cord. Reduces cord stress too.
• Status Indicator LED's - Provides a quick visual indication of your unit's status.

A Closer Look