INSTEON Keypad Dimmer Switch Product Details
INSTEON Keypad Dimmer Switch
Replace an existing light switch with INSTEON Keypad Dimmer Switch to remotely control lights and appliances from a single wall switch location, all without running new wires. This keypad Dimmer has a built-in 600-watt dimmer that is controlled by the large top and bottom buttons. The 4 other buttons can be linked wirelessly to control other lights or appliances in other parts of the house. All buttons feature backlit status LEDs so you can see at a glance which lights have been left on (or off). Buy the INSTEON Keypad Dimmer Switch today and brighten your workspace!
What It Is And Why You Need It:
- 600-watt dimmer; lets you adjust the light levels from dark to fully lit
- In wall controller; allows you control your devices from anywhere
- Built in LED; indicates the status of linked devices
Install one by your front door and if you forgot to turn off your bedroom light on your way out in the morning, you could simply press the corresponding keypad button to turn it off without having to run all the way back to the bedroom.
Easy To Install The Keypad Dimmer is easy to install and set up and yet so affordable, you'll be able to replace many of your switches with Keypad Dimmers. Just remove the old switch, reattach the line, load, and ground wires with the addition of the neutral wire using the included wire nuts, and you're done.
Scene Lighting Scenes allow you to control multiple lights with one button. You can save and control up to eight different individual lights, multi-light scenes, or even your whole home. Because the Keypad Dimmer can be a member of more than 400 scenes (i.e. "Movie Time," "Party," "Romance," etc.), you'll be able to launch various lighting scenarios with a press of one of the keypad buttons. These are elegant features usually found only in systems costing tens of thousands of dollars and requiring extensive rewiring of your home. All member lights can ramp to your independently desired brightness levels at your chosen ramp rates, so one set of lights can dim slowly while another set turns off instantly, all controlled with one command from one button.
Monitor Other Devices The buttons on the INSTEON KeypadLinc Dimmer illuminate when on signals are sent and when signals are detected from other linked INSTEON devices. This allows monitoring of lights in other rooms, which is incredibly useful if you want to control lights that aren't easily seen from the location, like those in bedrooms, bathrooms, basements, garages, attics, etc.
Flexible Setup The KeypadLinc gives you tremendous flexibility with controlling your lighting system. Other wall-mounted keypads only provide on/off control, each KeypadLinc button can perform up to four different functions. Press a button once for ON; press again for OFF. Press and hold to brighten, press and hold again to dim. If you prefer, turn off the toggle feature to send the same command every time. This is a helpful feature when programming an "all on" command button to press when you get home or "all off" command button to press when you leave for the day.
Brightness Levels Adjust the brightness level of the controlled light locally by pressing and holding the top or bottom button. This is especially helpful when you want to create a theatrical experience when watching your favorite movies. You can also adjust and control the brightness levels of linked devices by pressing any of the programmed buttons to send signals to brighten or dim an out-of-the-way light. You can link any of the Keypad Dimmer buttons to other keypads so when the light that is being controlled by both of the linked buttons, it will updated the on/off status that device and show on the KeypadLinc button. That way, you won't even have to leave the comfort of your chaise lounge to see the status of the controlled light. When you turn on the INSTEON KeypadLinc Dimmer, it automatically comes on to full brightness. Setting the preset on level will make the dimmer stop at your preferred choice of 32 brightness levels. With software you can control brightness levels in 1% increments for ultimate flexibility. Each button has an elegant white LED that indicates the current on/off status of the lights being controlled. To match your room's décor, a 4-Color KeypadLinc LED Kit is available with four colors: red, blue, amber, and green.
Adjustable Ramp Rate You can also adjust the speed at which the controlled light turns on or off, known as the ramp rate. For example, you may want the light in the stairwell to turn on instantly so you can see where you're walking. Alternatively, you may want the light in the master bathroom to ramp up in a soft, gentle fashion so you're not blinded in the middle of the night. The ramp rate is adjustable between 0.1 seconds and 9 seconds if programmed locally. The ramp rate can extend up to 8 minutes (for a simulated sunrise or sunset) if programmed remotely. This is a great addition to your morning alarm, slowly turning the light on to help you wake up. If you have programmed a slow ramp rate and want to make the light come on instantly, simply double tap the top button. To turn the light off quickly, double tap the bottom button.
Create Multi-Way Circuits The INSTEON KeypadLinc Dimmer allows you to customize your lighting setup no matter how your house is wired. It's simple to create a 3-, 4-, or 5-way circuit. First replace all of the existing switches you want to include in the circuit with either a Keypad Dimmer, INSTEON SwitchLinc Dimmer, or a INSTEON SwitchLinc On/Off (Non-Dimmable). The main dimmer must be connected to the standard wires, load, line, neutral, and ground. The secondary switches only need to be connected to line, neutral, and ground. No traveler wires are needed, so it is easy to place one of the switches wherever you need it. Cross-linking all of the companion dimmers to the master dimmer is the last step in the process. Note: Any time the Keypad Dimmer is placed directly adjacent to one another or any other electronic dimming switch, you must subtract 200 watts of capacity from each dimmer. If three dimmers are adjacent to one another, then 400 watts must be subtracted from the capacity of the center dimmer.
Compatibility The INSTEON KeypadLinc Dimmer is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. The KeypadLinc can respond to X10 commands from an X10 controller, and it can send X10 commands to X10 devices. Please note that INSTEON devices repeat INSTEON signals but not X10.
Additional Resources: Product Manuals
Manufactured by: Insteon
Warranty provided by: Insteon
UPC No: 0813922014471
Mfg Part No: 2334-292
( Length:7, Width:7, Depth:2)
Shipping Weight: 0.4000 pound(s)
Dimensional Weight: 1pounds
What is Dimensional weight?
Click here for full warranty and support information
- Insteon logos are registered trademarks of Insteon. All others trademarks and copyrights mentioned herein are the property of their respective owners.