Price: $23,85699
Add to cart
  1. Limit 8 per customer Add to cart
  2. Save to wishlist

Cisco Nexus 5596UP - Switch - managed - 48 x SFP+ - rack-mountable

Item#:  YYT1-10146258  | Model#: N5K-C5596UP-FA
List Price:
$36,800.00
Instant Savings:
- $12,943.01  (35%)
Price:
$23,856.99
Shipping:
Usually Ships within 48 Hours (Details)

Additional Resources

Product Details

Today's data centers are increasingly filled with dense rack-mount and blade servers that host powerful multicore processors. The rapid increase in in-rack computing density and the increasing use of virtualization software combine to accelerate the demand for 10 Gigabit Ethernet and consolidated I/O: applications for which the Cisco Nexus 5000 series switches are an excellent match. With low latency, front-to-back cooling, and rear-facing data ports, the Cisco Nexus 5000 series is designed for a broad range of physical, virtual, storage access, and high-performance computing environments, thus giving customers the flexibility to meet and scale their data center requirements in a gradual manner and at a pace that aligns with their business objectives.

The switch series, using cut-through architecture, supports line-rate 10 Gigabit Ethernet on all ports while maintaining consistently low latency independent of packet size and services enabled. It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks. These features allow the switches to support multiple traffic classes over a lossless Ethernet fabric, thus enabling consolidation of LAN, SAN, and cluster environments. Its ability to connect Fiber Channel over Ethernet (FCoE) to native Fiber Channel protects existing storage system investments while dramatically simplifying in-rack cabling.

In addition to supporting standard 10 Gigabit Ethernet network interface cards (NICs) on servers, the Cisco Nexus 5000 series integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fiber Channel host bus adapters (HBAs), making the transition to a single, unified network fabric transparent and consistent with existing practices, management software, and OS drivers. The Cisco Nexus 5000 series is designed for data center environments with cut-through technology that enables consistent low-latency Ethernet solutions, with front-to-back cooling, and with data ports in the rear, bringing switching into close proximity with servers and making cable runs short and simple. The switch series is highly serviceable, with redundant, hot-pluggable power supply and fan module.

The Cisco Nexus 5596UP is a two rack-unit chassis that provides 48 fixed "unified ports" on the base chassis along with 3 expansion slots, scaling up to a total of 96 ports. The switch delivers architectural flexibility, infrastructure simplicity, and business agility. For traditional, virtualized, unified, and high-performance computing (HPC) environments, this switch offers the IT and business advantages.

Specifications

General
   Device Type:  Switch - 48 ports - managed
   Enclosure Type:  Rack-mountable - 2U
   Ports:  48 x SFP+
   Performance:  Forwarding performance : 1920 Gbps
   MAC Address Table Size:  32K entries
   Jumbo Frame Support:  9216
   Routing Protocol:  RIP-2, BGP, EIGRP, IGMPv2, HSRP, VRRP, OSPFv2, static IP routing, IGMPv3, PIM-SSM, ECMP
   Remote Management Protocol:  SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI
   Encryption Algorithm:  AES
   Authentication Method:  RADIUS, TACACS+, MS-CHAP
   Features:  Layer 2 switching, ARP support, VLAN support, Syslog support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Rapid Per-VLAN Spanning Tree Plus
   Compliant Standards:  IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 801.1p

Expansion / Connectivity
   Interfaces:  48 x SFP+ ¦ 1 x 10Base-T/100Base-TX/1000Base-T - RJ-45 - management ¦ 1 x console - management
   Expansion Slot(s):  3 (total) / 3 (free) x expansion slot

Power
   Power Device:  Power supply - hot-plug / redundant - plug-in module
   Installed Qty:  2
   Power Redundancy:  Yes
   Power Redundancy Scheme:  1+1
   Voltage Required:  AC 120/230 V ( 50/60 Hz )
   Power Consumption Operational:  660 Watt

Miscellaneous
   Width:  17.3 in
   Depth:  29.5 in
   Height:  3.5 in
   Weight:  47.6 lbs
   Compliant Standards:  CE, CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, VCCI Class A ITE, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, EN300-386, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, GB 4943, CAN/CSA C22.2 No. 60950-1

Manufacturer Warranty
   Service & Support:  1 year warranty
   Service & Support Details:  Limited warranty - replacement - 1 year - response time: 10 days

Environmental Parameters
   Min Operating Temperature:  32 °F
   Max Operating Temperature:  104 °F
   Humidity Range Operating:  5 - 95% (non-condensing)
   Max Storage Temperature:  158 °F
 
  • Manufactured by: Cisco
    Warranty provided by: Cisco
    Mfg Part No: N5K-C5596UP-FA
    UPC No: 882658390890
    Box Size: ( Length:38, Width:23, Depth:10)
    Shipping Weight: 52.8000 pound(s)
    Click here for full warranty and support information
  • Limited Warranty: A full text version of the limited warranty may be obtained by mailing a self addressed, stamped envelope to the address below and requesting the warranty for item number: YYT1-10146258

    TigerDirect.com
    Warranty Information
    7795 W. Flagler St. Suite 35
    Miami, FL. 33144

  • Cisco logos are registered trademarks of Cisco. All others trademarks and copyrights mentioned herein are the property of their respective owners.