C2G HDMI HDBaset over CAT5 4-Port Transmitter -4 Displays, Up to 300ft, 1080p Video Resolution, HDMI Female, HDMI/RJ-45 Female, Supports EDID Pass Through, Aluminium- 29275Item#: 9512963 | Model#: 29275
- In Stock. Usually ships same business day. (Details)
C2G HDMI HDBaset over CAT5 4-Port Transmitter Product Details
C2G HDMI HDBaset over CAT5 4-Port Transmitter
The C2G HDMI HDBaset over CAT5 4-Port Transmitter allows HDMI audio/video signals to be extended over Cat5/Cat5e/Cat6 unshielded twisted pair cables to up to four displays at up to 300ft at a 1080p resolution. Up to sixteen displays may be supported when using additional transmitters and receivers. The Uses tab of this page shows an example of daisy-chaining two of these transmitters to support eight receivers/displays. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. The receivers are available in either a wall plate or box form factor and are interoperable with this transmitter allowing this solution to meet the needs of the installation environment. In addition, this solution utilizes TruChoice™ power providing the flexibility to power at either the transmitter or receiver end. HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display’s capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension.
It features buttons on the front of the unit that allow the content to the connected receivers and displays to be temporarily disabled. The ports may be disabled individually as a button is provided for each of the Cat5 output ports. This feature allows the user to edit content through a monitor connected to the local HDMI output of the transmitter without displaying content at the remote locations. HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i.e. communication of the capabilities of the display, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. The 4-Port HDMI over Cat5 Box Transmitter features four different modes of EDID communication to provide the best performance for the connected displays. The auto sync mode is ideal for situations where the displays are of the same make and model, or where the displays have identical performance characteristics. The three manual sync modes, Audio only, Video only and Audio and Video, utilize the EDID copy feature of the transmitter to store and use EDID information from a single monitor. This is ideal for situations where displays with different performance characteristics will be used. Copying and using the EDID information from the display with the lowest performance level will ensure that all displays are capable of receiving a signal. The LED lights on the front of the transmitter provide the communication status of the connected receivers and displays. Get the C2G HDMI HDBaset over CAT5 4-Port Transmitter soon!
What It Is And Why You Need It:
- HDMI over Cat5 Box Transmitter; extend HDMI to up to four displays at up to 300ft at a 1080p resolution
- HDBaseT technology; supports EDID pass through
- TruChoice™ Power; allows for power at either the transmitter or receiver end
Manufactured by: C2G
Warranty provided by: C2G
UPC No: 0757120292753
Mfg Part No: 29275
( Length:0, Width:0, Depth:0)
Shipping Weight: 4.2500 pound(s)
Click here for full warranty and support information
- C2G logos are registered trademarks of C2G. All others trademarks and copyrights mentioned herein are the property of their respective owners.