Item#:  YYI1-815292  | Model#: WS-C2950-24-RF  | Quality Refurbished

Currently Out Of Stock!

You May Consider This Alternative

Product Details

The Cisco Catalyst 2950-24 is a member of the Cisco Catalyst 2950 Series switches, and is a standalone, fixed-configuration, managed 10/100 switch providing user connectivity for small to mid-sized networks. This wire-speed desktop switch comes with Standard Image (SI) software features and offers Cisco IOS® functionality for basic data, video and voice services at the edge of the network. Embedded in all Catalyst 2950 Series is the Cisco Cluster Management Suite (CMS) Software, which allows users to simultaneously configure and troubleshoot multiple Catalyst desktop switches using a standard Web browser.

  • Manufacturer: Cisco Systems
  • Manufacturer Part Number: WS-C2950-24-RF
  • Product Line: Catalyst
  • Product Series: 2900
  • Product Name: 2950-24
  • Manufacturer Website Address:
  • Device Type: Ethernet Switch
  • Ports: 24 x 10/100Base-TX LAN
  • Ports Details: 24 x RJ-45 10/100Base-TX Auto-sensing LAN
  • Ports Details: 1 x RJ-45 Console Management
  • Slots Details: Not Applicable
  • Connectivity Media: Category 3, 4, 5 UTP 10Base-T
  • Connectivity Media: Category 5 UTP 100Base-TX
  • Data Transfer Rate: 200Mbps Fast Ethernet
  • Performance: Up to 2.4Gbps Forwarding Bandwidth
  • Performance: 8.8Gbps Switching Fabric
  • Performance: 3.6Mpps Forwarding Rate
  • MTBF: 268292 Hour(s)Predicted
  • Protocols Supported: IGMP
  • Protocols Supported: PVST+
  • Protocols Supported: PAgP
  • Protocols Supported: VTP
  • Protocols Supported: DTP
  • Protocols Supported: TFTP
  • Protocols Supported: NTP
  • Protocols Supported: CDP
  • Protocols Supported: LACP
  • Management: Management:
    - SNMP Management Information Base (MIB) II, SNMP MIB extensions, Bridging MIB (RFC 1493)

    Superior Manageability:
    - Cisco CMS allows the network administrator to manage up to 16 interconnected Catalyst 2950, 3550-12T, 3500 XL, 2900 XL, and 1900 switches through a single IP address and any standard Web browser, regardless of the location of the switches-that is, the switches do not have to be physically located in the same wiring closet
    - Switch clustering software upgrade allows network administrators to upgrade the system software of up to 16 interconnected switches through the easy-to-use Cisco CMS interface or a single CLI command
    - Simple Network Management Protocol (SNMP), and Telnet interface support delivers comprehensive in-band management, and a CLI-based management console provides detailed out-of-band management
    - Manageable through CiscoWorks Windows network management software on a per-port and per-switch basis providing a common management interface for Cisco routers, switches, and hubs
    - Embedded Remote Monitoring (RMON) software agent supports four RMON groups (History, Statistics, Alarms and Events) for enhanced traffic management, monitoring, and analysis
    - Switch Port Analyzing (SPAN) port monitors traffic of a single port from a single network analyzer or RMON probe
    - Autoconfiguration eases deployment of switches in the network by automatically configuring multiple switches across a network via a boot server
    - Domain Name Services (DNS) provide IP address resolution with user-defined device names
    - Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location
    - Network Time Protocol (NTP) provides an accurate and consistent timestamp to all switches within the intranet
    - Spanning Tree Root Guard (STRG) prevents edge devices that are not in the network administrator's control from becoming STP root nodes
    - Multi-function LEDs per port for Port Status, half-duplex/full-duplex, 10BaseT/100BaseTX/1000BaseT indication as well as switch-level status LEDs for system, RPS, and bandwidth utilization provide a comprehensive and convenient visual management system
  • Operating System: - Standard Image (SI) software installed
  • Security: - Private VLAN Edge provides security and isolation between ports on a switch, ensuring that voice traffic travels directly from its entry point to the aggregation device through a virtual path and cannot be directed to a different port
    - MAC-based port level security prevents unauthorized stations from accessing the switch
    - User-selectable address learning mode simplifies configuration and enhances security
    - Multilevel security on console access prevents unauthorized users from altering the switch configuration
    - Support for TACACS+ authentication enables centralized control of the switch and restricts unauthorized users from altering the configuration
  • Status LEDs: Per-port status LEDs:
    - Link integrity
    - Disabled
    - Activity
    - Speed
    - Full-duplex

    System status LEDs:
    - System
    - RPS
    - Bandwidth utilization
  • Memory: 16MB Main Memory Installed
  • Memory: 8MB Flash Memory Installed
  • Memory: 8MB Buffer Memory Shared Installed
  • Address Table: 8K MAC Addresses
  • Additional Information: - Refurbished
    - No Returns

    - 64-port-based VLANS

    Cisco RPS Connector:
    - Connection for an optional Cisco RPS 300 that uses AC input and supplies DC output to the switch
    - 300-watt redundant power system that can support six external network devices and provides power to one failed device at a time
    - Automatically senses when the internal power supply of a connected device fails and provides power to the failed device, preventing loss of network traffic
    - When internal power supply has been brought up or replaced, the RPS 300 automatically stops powering the device
    - Attach only the Cisco RPS 300 (model PWR300-AC-RPS-N1) to the RPS receptacle
  • Certifications & Standards: Standards:
    - IEEE 802.1x support (planned future software support)
    - IEEE 802.3x full duplex on 10BaseT, 100BaseTX, and 1000BaseT ports
    - IEEE 802.1D Spanning-Tree Protocol
    - IEEE 802.1p CoS
    - IEEE 802.1Q VLAN
    - IEEE 802.3ab 1000BaseT specification
    - IEEE 802.3u 100BaseTX specification
    - IEEE 802.3 10BaseT specification

    - UL/CSA G0950 Third Edition
    - CSA 22.2 No. 950
    - EN 60950
    - IEC 950
    - AS/NZS 3260, TS001
    - CE Marking

    Electromagnetic Emissions:
    - FCC Part 15 Class A
    - EN 55022 Class A (CISPR 22 Class A)
    - VCCI Class A
    - AS/NZS 3548 Class A
    - CE Marking
    - CLEI Code
    - BSMI Class A

    - Y2K compliant
  • Input Voltage: 100 to 127V AC
  • Input Voltage: 200 to 240V AC
  • Frequency: 50 to 60Hz
  • Power Consumption: 30W Operating
  • Power Supply: 300W Redundant Not Included
  • Temperature: 23 to 113°F Operating
  • Temperature: -5 to 45°C Operating
  • Temperature: -13 to 158°F Storage
  • Temperature: -25 to 70°C Storage
  • Humidity: 10 to 95% Non-condensing Relative Humidity Operating
  • Altitude: 10000 ft Maximum Operating
  • Altitude: 15000 ft Maximum Storage
  • Form Factor: 1U Rack-mountable
  • Dimensions: 1.72" Height x 17.5" Width x 9.52" Depth
  • Shipping Dimensions: 8" Height x 12.5" Width x 22" Depth
  • Weight: 6.5 lb
  • Standard Warranty: Lifetime Limited

The terms refurbished and recertified are used interchangeable to describe products that manufacturers refurbished, inspected, brought back to original manufacturer’s specification then tested and repackaged for sale. Some manufacturers refurbish products themselves and others use a qualified third party refurbisher. Refurbished products represent a great value and we offer them with confidence knowing that every refurbished product was tested at least twice, once when it was first manufactured and again during the refurbishing process. Refurbished products are warranted by either the original manufacturer or the manufacturer’s third party refurbisher. Warranty terms applicable to refurbished products may vary; see below for specific warranty information and consider purchasing an extended service plan if you desire even more coverage.

  • Manufactured by: Cisco
    Warranty provided by: Cisco
    Mfg Part No: WS-C2950-24-RF
    UPC No: 746320773964
    Box Size: ( Length:0, Width:0, Depth:0)
    Shipping Weight: 10.1000 pound(s)
    Click here for full warranty and support information
  • Limited Warranty: A full text version of the limited warranty may be obtained by mailing a self addressed, stamped envelope to the address below and requesting the warranty for item number: YYI1-815292
    Warranty Information
    7795 W. Flagler St. Suite 35
    Miami, FL. 33144

  • Cisco logos are registered trademarks of Cisco. All others trademarks and copyrights mentioned herein are the property of their respective owners.