Cisco Supervisor Engine 6L-E - control pr
Price: $8,66300 with $6.99 Shipping!
ADD TO CART
Cisco Supervisor Engine 6L-E - control pr
  1. ADD TO CART
  2. Save to wishlist

Cisco Supervisor Engine 6L-E - Control processor - 10 GigE - plug-in module - for Catalyst 4503-E, 4506-E, 4507R-E, 4510R-E (WS-X45-SUP6L-E=)

Item#:  7792830  | Model#: WS-X45-SUP6L-E=
Price:
$8,663.00
$6.99 Shipping
Shipping:
Temporarily out of stock. Order today and we'll deliver when available. (Details)

Cisco Supervisor Engine 6L-E - control pr Product Details

The Supervisor Engine 6L-E delivers 24 Gbps per slot of switching capacity when deployed with the E-Series line cards in a Cisco Catalyst 4500 E-series chassis. You can mix and match classic line cards and E-Series line cards within a Cisco Catalyst 4500 E-series chassis with no performance degradation. When you deploy the Cisco Catalyst Supervisor Engine 6L-E with classic line cards, all of the features except the 24-Gbps per-slot switching capacity are inherited.

The Cisco Catalyst Supervisor Engine 6L-E also provides flexibility and an easy migration path to 10 Gigabit Ethernet uplinks with dual-purpose X2 slots that can accommodate wire-speed 10 Gigabit Ethernet optics or Cisco TwinGig Converter Modules, enabling Gigabit Ethernet SFP optics.

The Cisco TwinGig converter module, which ships standard with the Supervisor Engine 6L-E, converts a single 10 Gigabit Ethernet X2 interface into two Gigabit Ethernet port slots that can be populated with appropriate SFP optics, providing a total of 4 Gigabit Ethernet uplinks if used in both X2 interface slots. With the flexibility offered by the Cisco TwinGig converter module, you can initially use the gigabit uplinks, and then, as your business demands change, you can simply remove the Cisco TwinGig converter module and insert 10 Gigabit Ethernet X2 optics to provide full line-rate 10 Gigabit Ethernet uplinks. The ability to support both Gigabit Ethernet uplinks and 10 Gigabit Ethernet uplinks on a single supervisor engine further demonstrates the flexibility and the investment protection of the Cisco Catalyst 4500 series.

Power consumption on the Supervisor Engine 6L-E is optimized, and when combined with Cisco Catalyst 4500 line cards, the system supports Power over Ethernet (PoE), Cisco enhanced PoE, and ready for PoEP with support for 30W/port.

The capabilities and investment protection provided by the Supervisor Engine 6L-E facilitate not only adequate scalability for today's network access requirements but also future-proofing by providing significant software functionalities for future deployments.

Specifications

General
   Device Type:  Control processor

Processor / Memory / Storage
   RAM:  512 MB (1 GB max) SDRAM

Networking
   Form Factor:  Plug-in module
   Connectivity Technology:  Wired
   Data Link Protocol:  10 Gigabit Ethernet
   Network / Transport Protocol:  NTP, ICMP/IP
   Routing Protocol:  RIP, RIP-2, EIGRP, static IP routing
   Remote Management Protocol:  SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SSH, SSH-2
   Performance:  Switching capacity: 280 Gbps ¦ IPv4 routing: 225 Mpps ¦ IPv6 routing: 110 Mpps
   Capacity:  QoS hardware entries: 32000 ¦ Security services entries: 32000 ¦ Hardware forwarding entries: 57000 ¦ IPv4 routes: 57000 ¦ IPv6 routes: 30000 ¦ MAC addresses: 55000 ¦ Virtual interfaces (VLANs): 4096
   Status Indicators:  Bandwidth utilization %, link OK, status, link/activity
   Features:  Auto-negotiation, VLAN support, IGMP snooping, Broadcast Storm Control, IPv6 support, Multicast Storm Control, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Access Control List (ACL) support, Quality of Service (QoS), Multicast Suppression, Jumbo Frames support, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping
   Authentication Method:  Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2)
   Compliant Standards:  IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP)

Communications
   Supported Flash Memory Cards:  CompactFlash Card

Expansion / Connectivity
   Expansion Slots:  2 (total) / 0 (free) x X2 ¦ 4 (total) / 4 (free) x SFP (mini-GBIC)
   Interfaces:  1 x management - RJ-45 ¦ 1 x 1000Base-T (management) - RJ-45
   Compatible Slots:  1 x expansion slot

Miscellaneous
   Compliant Standards:  FCC Class A certified, CISPR 22 Class A, EN 60950, EN 61000-3-2, EN55022, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, CSA 22.2 No. 60950, ACA TS001, AS/NZS 3260, ICES-003 Class A, FCC CFR47 Part 15

Manufacturer Warranty
   Service & Support:  Limited warranty - lifetime

Environmental Parameters
   Min Operating Temperature:  32 °F
   Max Operating Temperature:  104 °F
   Humidity Range Operating:  10 - 90%

Compatibility Information
   Designed For:  Cisco Catalyst 4503-E, 4506-E, 4507R-E, 4510R-E
 
  • Manufactured by: Cisco
    Warranty provided by: Cisco
    UPC No: 0882658259111
    Mfg Part No: WS-X45-SUP6L-E=
  • Box Size: ( Length:17, Width:20, Depth:6)
    Shipping Weight: 11.1000 pound(s)
    Click here for full warranty and support information
  • Cisco logos are registered trademarks of Cisco. All others trademarks and copyrights mentioned herein are the property of their respective owners.
Plus get insider deals first, exclusive promotions and more!
 
Sponsored by: