Tripp Lite SmartOnLine SU40K - Power array - AC 120/208 V - 32 kW - 40000 VA - RS-232Item#: BB T105-9101  |  Model#: SU40K

Tripp Lite's SU40K (40kVA) SmartOnline modular 3-phase intelligent, true on-line UPS system provides 100% system availability with N+1 modular architecture and 1+1 parallel capability. In an N+1 configuration, the SU40K provides two self-contained, redundant 20kVA power modules that can be hot-swapped (with the load powered) if maintenance is required. Connect two SU40K models in parallel (1+1 configuration) to provide fail-safe redundancy or to increase capacity.

The SU40K provides mission-critical equipment with the highest level of power protection available. Large capacity UPS continually converts incoming AC power into filtered DC power, and then resynthesizes it back into AC power with a pure sine wave. Perfectly regulated, continuous sine wave output with zero transfer time assures compatibility with all equipment types. The SU40K's high input power factor, advanced IGBT inverter technology and Digital Signal Processor (DSP) technology produce less than 3% input Total Harmonic Distortion (THDi). With low THDi, generators run cooler and last longer, allowing managers to save installation costs by installing a generator with a capacity equal to the equipment load (1:1 ratio). Extremely efficient operation (up to 96%) saves money by lowering electricity consumption. Hardwire input and output connections support a variety of permanent or PDU-style power connections. The SU40K features 120/208V AC, 3-phase, 4-wire (plus ground), wye input and output. It also features a wide input voltage correction range: 94-150/163-260V AC. Frequency is 50 or 60 Hz (auto-selectable). The SU40K combines internal power and battery components in a single small-footprint tower module. Typical half-load / full-load runtimes are 13 min. / 5.5 min. A manual bypass breaker and an automatic bypass function ensure 100% availability of connected equipment by safely passing through AC power if the UPS requires maintenance. A built-in RS-232 communication port works with included PowerAlert software to provide shutdown commands and reporting on a single server. Front panel combination LCD / LED display alerts users to a variety of UPS operational modes and conditions. The LCD display includes a real-time event log screen with up to 500 events listed. A dynamic battery management screen optimizes battery function to lengthen service life and allows cold restart of the UPS during a prolonged blackout to utilize its batteries for periodic system access or data retrieval. An Emergency Power Off button turns the UPS output off and disables Bypass output. Built-in Emergency Power Off (EPO) dry-contact interface supports remote emergency shutdown in large facilities.

Specifications

General
   Device Type:  Power array - external
   Battery Enclosure Type:  Internal
   Width:  20.5 in
   Depth:  33.5 in
   Height:  66.9 in
   Weight:  1503.5 lbs
   Enclosure Color:  Attractive black

Power Device
   UPS Technology:  On-line
   Power Modules Qty:  2
   Power Redundancy:  Yes
   Power Redundancy Scheme:  N+1
   Input Voltage:  AC 120/208 V
   Input Voltage Range:  AC 94 - 150 / 163 - 260 V
   Input Wiring:  3-phase WYE (star)
   Frequency Required:  50/60 Hz
   Input Connector(s):  Hardwire 4-wire
   Output Voltage:  AC 120/208 V ( 50/60 Hz )
   Power Output Connectors Details:  Hardwire 4-wire
   Power Capacity:  32 kW / 40000 VA
   Output Waveform:  Sinewave
   Surge Suppression:  Standard
   Surge Energy Rating:  4675 Joules
   Circuit Protection:  Circuit breaker

Battery
   Technology:  Lead acid
   Voltage Provided:  480 V
   Run Time (Up To):  5.5 min at full load
   Recharge Time:  4 hour(s)

Networking
   Remote Management Interface:  RS-232

Expansion / Connectivity
   Interfaces:  1 x management - RS-232 - 9 pin D-Sub (DB-9) ¦ 1 x management - EPO (emergency power off) ¦ 1 x management - 9 pin D-Sub (DB-9)
   Expansion Slot(s):  2 (total) / 2 (free) x expansion slot

Miscellaneous
   Features:  Emergency power off, LCD display, Parallel Capability, LED indicators
   Compliant Standards:  UL, cUL, NOM, RoHS

Software / System Requirements
   Software Included:  TrippLite PowerAlert

Manufacturer Warranty
   Service & Support:  1 year warranty
   Service & Support Details:  Limited warranty - 1 year

Environmental Parameters
   Min Operating Temperature:  32 °F
   Max Operating Temperature:  104 °F
   Humidity Range Operating:  0 - 90%

Dimensions & Weight (Shipping)
   Shipping Width:  28.7 in
   Shipping Depth:  45.7 in
   Shipping Height:  76.4 in
   Shipping Weight:  1690.9 lbs