LCD CAB CART 26-47IN-VESA 200MM MOUNT Product Details
The FPPC72V200 has adjustable mounting arms and is 100 mm to 500 mm height and 100 mm to 600 mm width adjustable to fit the mounting holes of most smaller flat panel monitors, 26" to 47" diagonal. The monitor should be mounted on the pole so that the top of the monitor does not extend above the top of the pole. A kit including several sizes of spacers, washers, and bolts is included to fit the mounting assembly to the back panel of most monitors. Additional hardware may need to be purchased at your local hardware store. The monitor and accessories attach to the vertical pole using a mounting nugget that bolts into place and features a transition plate that supports an adjustable mounting device.The FPPC72V200 has a vertical pole which is 72"l and constructed from extruded aluminum with multiple mounting holes spaces, 1" apart, and the entire length of the pole. The vertical pole slides over a mounting post and attaches to a plate at the base of the cabinet and secured with two 1/4" screws at the post and one 1/2" hex head center bolt at the base. The cabinet is constructed with a 20-gauge steel base, 18-gauge steel side panels and doors, and either a laminate or veneer top. FPPC72V200 only comes with a laminate top. Front and rear doors secure with keyed locks, two keys included. The interior includes 19" rack mount rails that mount to the right side of the cabinet. The cabinet is constructed using a convection design that allows warm air to escape from the top while drawing cool air up through the base to cool electronic equipment. Four 4" twin wheel casters, all locking, and two handles allow transport from one location to another.