Tripp Lite HDMI over Cat5/Cat6 Active Video Product Details
The transmitter's built-in HDMI cable connects to the audio/video source, and the receiver's built-in HDMI cable connects to the display. Cat5e/6 cable connects the two units (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series). Each unit is powered by an included USB Micro-B to USB-A cable, which must be connected between the unit and a USB port on the source device, display or USB wall charger. You can also connect an optional HDMI monitor to the transmitter's local port with a user-supplied HDMI cable, such as Tripp Lite's P568-Series.
The B126-1A1-U can extend a 1080p (@ 60 Hz) signal up to 38.1 m (125-ft.) with full, rich stereo. Built-in RJ45 LEDs indicate the units are receiving power and a signal from the source. Built-in equalization control lets you fine-tune the image quality at each remote display. Easy to set up with no software or drivers to install. Works with all operating systems and HDMI sources.
Device Type: Video/audio extender
Form Factor: External
Connectivity Technology: Wired
Max Resolution: 1080p @ 60 Hz
Max Transfer Distance: 125 ft
Features: USB powered, HDCP compliant
Expansion / Connectivity
Interfaces: 2 x HDMI - 19 pin HDMI Type A ¦ 2 x micro-USB
Included Accessories: Screwdriver
Cables Included: 2 x micro-USB to USB cable - 1 ft
Compliant Standards: Plug and Play, RoHS
TAA Compliant: Yes
Service & Support: Limited warranty - 1 year
Manufactured by: Tripp Lite
Warranty provided by: Tripp Lite
UPC No: 037332190260
Mfg Part No: B126-1A1-U
( Length:0, Width:0, Depth:0)
Shipping Weight: 0.5000 pound(s)
Click here for full warranty and support information
- Tripp Lite logos are registered trademarks of Tripp Lite. All others trademarks and copyrights mentioned herein are the property of their respective owners.