Ruled filler paper features a Mylar-reinforced edge at the binding side to prevent tear-out. Each 20 lb. sheet is punched with three 9/32 round holes to fit inside standard three-ring binders.
What you should know
 |
Assembling Barebones Computer Kits & Computer Cases
Remember when assembling one of our money-saving Barebone Computer Kits, or
installing your existing computer components into a new computer case, you
may have to modify the case to fit your components - This Is Normal!
Cases are designed to hold and accommodate a wide variety of motherboards,
interface cards, connectors, and other components. Because of this,
the case manufacturer designs their cases with easily removable panels to
allow these components to properly fit in the case. All you need to do
is punch them out with a screw driver or fold them over with a pair of
pliers to snap out the metal piece for your exact components. In this
way, you save the cost of assembling your computer, and have the
satisfaction of building your own workstation.
PLEASE NOTE:
Carefully read all documentation BEFORE you start to assemble your Barebones
Kit or add components to a Computer Case. Some components need to be
assembled in a specific order. Also place the components in the case
temporarily to confirm any modifications (punch outs) that need to be made
to fit that component.
 |

 |
Important Info About Barebones
Computer Kits
Our money-saving Barebone Computer Kits gives you the opportunity to build
or upgrade your perfect computer at an affordable cost, by installing key
components yourself. Most components included in our Barebones Kits,
including power supplies, are not pre-assembled (mounted and connected in
the case). With Barebones Kits, where we include a case and a separate power
supply, the case specifications may not indicate the presence of an attached
power supply (simply because it is a separate component). This is also
because you must install the included power supply yourself. |
