D-Link xStack DGS-3620-28PC - Switch - L3 - managed - 20 x 10/100/1000 + 4 x combo Gigabit SFP + 4 x 10 Gigabit SFP+ - desktop - PoEItem#: 8843764 | Model#: DGS-3620-28PC/EI
- Temporarily out of stock. Order today and we'll deliver when available. (Details)
D-Link xStack DGS-3620-28PC - switch - 24 ports Product Details
The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) and the Enhanced Image (EI). The Standard Image provides fundamental features for campuses and enterprises such as switching, routing, multicasting, advanced Quality of Service (QoS), and robust security features. The Enhanced Image supports OAM, BGP, IPv6 dynamic routing and tunneling, which are all suitable for the service provider network.
Easily deployed and simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Link's Single IP Management (SIM) to form a multi-level network structured with backbone and centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, and the need for stack cabling.
Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth and high port densities on the already cost efficient DGS-3620 Series.
The DGS-3620 Series provides a complete set of security features including L2/L3/L4 multi-layer Access Control Lists and 802.1x user authentication via TACACS+ and RADIUS servers. D-Link ZoneDefense technology is built-in allowing businesses to integrate the switch stack with D-Link NetDefend firewalls to implement a complete and proactive security infrastructure.
The DGS-3620 Series offers extensive VLAN support including GVRP and 802.1Q VLAN to enhance security and performance. A robust set of L2/L3/L4 QoS/CoS solutions help ensure that critical network services such as VoIP and video conferencing are served with proper priority. The DGS-3620 Series provides D-Link's Safeguard Engine to increase the switch's reliability, serviceability, and availability to prevent malicious flooding traffic caused by worms/virus infections. Bandwidth Control can be flexibly set for each port using pre-defined thresholds to assure a committed level of service for end users. For advanced applications, flow-based bandwidth control allows easy fine-tuning of service types based on specific IP addresses or protocols.
The DGS-3620 Series also features comprehensive IPv6 support, including IPv6 Tunneling, ICMPv6, DHCPv6, RIPng, OSPFv3, etc. With 10-Gigabit connectivity and IPv6 support, the DGS-3620 Series enables you to future-proof your network for cost efficiency and longevity while meeting the requirements for IPv6 capable network devices in the coming years.
D-Link is striving to take the lead in developing innovative and power-saving technology that does not sacrifice operational performance or functionality. The DGS-3620 Series implements the D-Link Green Technology, which includes a power saving mode, smart fan, reduced heat dissipation, and cable length detection. The power saving feature automatically powers down ports that have no active link.
Device Type: Switch - 24 ports - L3 - managed - stackable
Enclosure Type: Desktop 1U
Subtype: Gigabit Ethernet
Ports: 20 x 10/100/1000 + 4 x combo Gigabit SFP + 4 x 10 Gigabit SFP+
Power Over Ethernet (PoE): PoE
Performance: Switching capacity: 128 Gbps ¦ Forwarding performance: 95.24 Mpps
MAC Address Table Size: 32K entries
Jumbo Frame Support: 13000 bytes
Max Units In A Stack: 12
Routing Protocol: OSPF, RIP-1, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, PIM-DM, IGMPv3, OSPFv3, PIM-SSM, policy-based routing (PBR), Bidirectional Forwarding Detection (BFD)
Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, TFTP, CLI
Encryption Algorithm: SSL, SSL 2.0
Authentication Method: Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Features: Flow control, full duplex capability, power over Ethernet (PoE), BOOTP support, trunking, VLAN support, IGMP snooping, Syslog support, port mirroring, Broadcast Storm Control, IPv6 support, SNTP support, sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Trivial
Compliant Standards: IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1v, IEEE 802.3at
RAM: 256 MB
Expansion / Connectivity
Interfaces: 4 x SFP (mini-GBIC) ¦ 1 x console - RJ-45 - management ¦ 24 x 1000Base-T - RJ-45 ¦ 4 x SFP+
Expansion Slots: 1 SD Memory Card
Power Device: Internal power supply
Voltage Required: AC 120/230 V (50/60 Hz)
Features: Redundant Power System (RPS) connector
Compliant Standards: FCC Class A certified, UL, VCCI, C-Tick, cUL, RoHS, GOST-R
Software / System Requirements
Software Included: Enhanced Image (EI) Software
Dimensions & Weight
Width: 17.4 in
Depth: 12.2 in
Height: 1.7 in
Weight: 9.04 lbs
Service & Support: Limited warranty - lifetime
Min Operating Temperature: 32 °F
Max Operating Temperature: 122 °F
Humidity Range Operating: 10 - 90%
Min Storage Temperature: -40 °F
Max Storage Temperature: 158 °F
Humidity Range Storage: 5 - 90%
Manufactured by: D-Link
Warranty provided by: D-Link
UPC No: 0790069352843
Mfg Part No: DGS-3620-28PC/EI
( Length:0, Width:0, Depth:0)
Shipping Weight: 19.3400 pound(s)
Click here for full warranty and support information
- D-Link logos are registered trademarks of D-Link. All others trademarks and copyrights mentioned herein are the property of their respective owners.