Netmon Siren and Strobe Light with free 5' Product Details
The combined strobe light and siren can add audio and visual alarms to your SensorHawk base unit. When triggered, the siren will generate a loud alarm sound and the strobe light will flash brightly, giving a clear alert of an alarm condition.
The siren and alarm are both incorporated into one device - only one RJ-45 jack is needed for each combined siren/alarm.
Each device comes with a connecting cable 5 feet in length. You can connect the siren / strobe light using your own CAT 5 cable, up to 1000 feet, allowing the sensors to be positioned in hot spots and the alarm itself to be in a different location.
When a combined siren / strobe light is plugged into the RJ-45 port, the SensorHawk unit will auto detect the sensor, and it will display the status of the device.
The siren / strobe light can be triggered manually, via the web interface, or it can be configured to turn on at certain times, through the web interface. The device can be triggered by any sensor connected to a SensorHawk Base Unit.
Specifications and Features:
^^ Measurement range: Alarm or Normal
^^ Communications Cable: RJ45 jack to sensor using UTP Cat 5 wire
^^ Maximum extension cable length: 305m (1000 feet) with approved low-capacitance shielded cable or UTP
^^ Sensor Type: Open / closed contact switch
^^ Measurement Rate: Multiple readings every second
^^ Full autosense including disconnect alarm