JMR FORTRA A2 - storage enclosure
Price: $1399
JMR FORTRA A2 - storage enclosure
  2. Save to wishlist

JMR FORTRA A2 - Storage enclosure - 15 bays ( SATA ) - rack-mountable - 3U

Item#:  13514582  | Model#: FR15GAN2-2SA2-S
Temporarily out of stock. Order today and we'll deliver when available. (Details)

JMR FORTRA A2 - storage enclosure Product Details

The 15-Bay Fiber-to-SATA disk array subsystem is powered by a sophisticated RAID controller technology. With 64-bit architecture and advanced firmware, functions run by the Intel RISC processor, data is distributed and processed at raging speed among CPU, memory, and drives.

The RAID array in all models can be configured to levels 0, 1 (0+1), 3, 5 and JBOD. Each drive array allows one HDD failure without impact on the existing data and failed drive rebuild is transparent to the host. System operation is constantly protected by redundant cooling fans and redundant power supplies. Environmental information and management is accessible via the GUI Interface through RS-232 or Fiber Channel.

The subsystem's high performance comes from its 64-bit Intel 80303 64-bit RISC microprocessor. The 64-bit bus bandwidth at 66MHz between SDRAM and CPU makes its high data throughput more than sufficient for small-to-medium sized servers or workstations. Data can be distributed through a high-speed 64-bit path at a burst rate up to 533MB/sec. The dual independent PCI bus design efficiently eliminates bandwidth bottlenecks for IO traffic. Balanced bus loading and the superior architecture make the Fortra A2 an optimal RAID solution for a wide range of Fiber based PCs and servers.


   Device Type:  Storage enclosure
   Enclosure Type:  Rack-mountable - 3U
   Enclosure Color:  Black

   Installed Devices / Modules Qty:  0
   Supported Devices / Modules Qty:  15
   Supported Drives:  SATA

   Type:  80303

Storage Controller
   Type:  RAID ( Fibre Channel )
   Interface Type:  SATA 1.5Gb/s
   Data Transfer Rate:  150 MBps
   Supported Devices:  Hard drive
   RAID Level:  RAID 0, RAID 1, RAID 3, RAID 5, JBOD, RAID 0+1

Hard Drive
   Type:  No HDD

Expansion / Connectivity
   Expansion Bays:  15 (total) / 15 (free) x hot-swap - 3.5"
   Interfaces:  1 x Fibre Channel

   Power Device:  2 x internal power supply - hot-plug
   Max Supported Qty:  2
   Power Redundancy:  Yes
   Power Redundancy Scheme:  1+1
   Voltage Required:  AC 120/230 V - 50/60 Hz
   Power Provided:  430 Watt

Dimensions & Weight
   Width:  19 in
   Depth:  23 in
   Height:  5.2 in
   Weight:  40.12 lbs
  • Manufactured by: JMR
    UPC No:
    Mfg Part No: FR15GAN2-2SA2-S
  • Box Size: ( Length:0, Width:0, Depth:0)
    Shipping Weight: 0.0100 pound(s)
    Click here for full warranty and support information
  • JMR logos are registered trademarks of JMR. All others trademarks and copyrights mentioned herein are the property of their respective owners.
Plus get insider deals first, exclusive promotions and more!
Sponsored by: