HPE 3800-48G-4XG Switch - Switch - L4 - managed -
Price: $4,23999 with $6.99 Shipping!
ADD TO CART
HPE 3800-48G-4XG Switch - Switch - L4 - managed -
  1. ADD TO CART
  2. Save to wishlist

HPE 3800-48G-4XG Switch - Switch - L4 - managed - 48 x 10/100/1000 + 4 x 10Gb Ethernet - rack-mountable - remarketed (J9586AR)

Item#:  13160707  | Model#: J9586AR  | Quality Refurbished
Price:
$4,239.99
$6.99 Shipping
Shipping:
Temporarily out of stock. Order today and we'll deliver when available. (Details)

Additional Resources

HPE 3800-48G-4XG Switch - Switch - L4 - managed - Product Details

The HP 3800 Switch Series is a family of nine fully managed Gigabit Ethernet switches available in 24-port and 48-port models, with or without PoE+, and with either SFP+ or 10GBASE-T uplinks. The 3800 Switch Series utilizes the latest HP ProVision ASIC technology and advances in hardware engineering to deliver one of the most resilient and energy-efficient switches in the industry. Meshed stacking technology is implemented in the HP 3800 Switch Series to deliver chassis-like resiliency in a flexible, stackable form factor. Software-defined networking
  • OpenFlow --- supports OpenFlow 1.0 and 1.3 specifications to enable SDN by allowing separation of the data (packet forwarding) and control (routing decision) paths
Quality of Service (QoS)
  • Advanced classifier-based QoS --- classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis
  • Layer 4 prioritization --- enables prioritization based on TCP/UDP port numbers
  • Class of Service (CoS) --- sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
  • Bandwidth shaping ---
    • Port-based rate limiting --- provides per-port ingress-/egress-enforced increased bandwidth
    • Classifier-based rate limiting --- uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port
    • Reduced bandwidth --- provides per-port, per-queue egress-based reduced bandwidth
  • Remote intelligent mirroring --- mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HP 8200 zl, 6600, 6200 yl, 5400 zl, 3800, or 3500 Switch anywhere on the network
  • RMON, XRMON, and sFlow v5 --- provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
  • Traffic prioritization --- allows real-time traffic classification into eight priority levels mapped to eight queues
Management
  • Friendly port names --- allows assignment of descriptive names to ports
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP) --- advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
  • Command authorization --- leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; an audit trail documents activity
  • Uni-Directional Link Detection (UDLD) --- monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional link into a unidirectional one; this prevents network problems such as loops
  • Multiple configuration files --- stores easily to the flash image
  • Dual flash images --- provides independent primary and secondary operating system files for backup while upgrading
  • Out-of-band Ethernet management port --- enables management over a separate physical management network; keeps management traffic segmented from network data traffic
  • Comware CLI ---
    • Comware-compatible CLI --- bridges the experience of HP Comware CLI users who are using the HP ProVision software CLI
    • Display and fundamental Comware CLI commands --- are embedded in the switch CLI as native commands; display output is formatted as on Comware-based switches, and fundamental commands provide a Comware-familiar initial switch setup
    • Configuration Comware CLI commands --- when Comware commands are entered, CLI help is elicited to formulate the correct ProVision software CLI command
Connectivity
  • Jumbo frames --- on Gigabit Ethernet and 10-Gigabit Ethernet ports, jumbo frames allow high-performance remote backup and disaster-recovery services
  • IEEE 802.3at Power Over Ethernet Plus (PoE+) --- provides up to 30 W per port to IEEE 802.3 for devices that use PoE/PoE+, such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/zoom/tilt security cameras
  • Prestandard PoE support --- detects and provides power to prestandard PoE devices; see list of supported devices in the product FAQs at www.hp.com/networking
  • Choice of uplinks ---
    • SFP+ uplink models --- provide fiber-optic (up to 70 km) or direct attach cable (DAC) connectivity
    • 10GBASE-T uplink models --- offer 10GbE speeds using standard RJ-45 connectors and standard twisted pair cabling up to 100 m
  • Auto-MDIX --- automatically adjusts for straight-through or crossover cables on all RJ-45 ports
  • IPv6 ---
    • IPv6 host --- enables switches to be managed in an IPv6 network
    • Dual stack (IPv4 and IPv6) --- transitions from IPv4 to IPv6, supporting connectivity for both protocols
    • MLD snooping --- forwards IPv6 multicast traffic to the appropriate interface
    • IPv6 ACL/QoS --- supports ACL and QoS for IPv6 network traffic
    • IPv6 routing --- supports static and OSPFv3 routing protocols
    • 6in4 tunneling --- supports encapsulation of IPv6 traffic in IPv4 packets
Performance
  • Selectable queue configurations --- allows for increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications
  • Energy-efficient design ---
    • High-efficiency power supplies --- 80 PLUS Gold-certified power supplies increase power savings
    • Energy-efficient Ethernet support --- IEEE 802.3az support reduces power consumption
Specifications I/O ports and slots 48 RJ-45 autosensing 10/100/1000 ports Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) 4 RJ-45 10GbE ports Duplex: full only (IEEE 802.3an-2006 Type 10GBASE-T) 1 RJ-45 serial console port 1 RJ-45 out-of-band management port 1 stacking module slot Memory and processor HP ProVision ASIC/ARM @ 350 MHz; Freescale P2020 @ 1200 MHz, 4 GB flash, 2 GB SDRAM; packet buffer size: 36 MB dynamic Mounting and enclosure Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only Performance 1000 Mb Latency: < 2.8 µs (LIFO 64-byte packets) 10 Gb/s Latency: < 1.9 µs (LIFO 64-byte packets) Throughput: up to 130.9 million pps (64-byte packets) Switching capacity: 176 Gb/s Routing table size: 10000 entries (IPv4) MAC address table size: 65500 entries Environment Operating temperature: 32°F to 131°F (0°C to 55°C); max temperature is 45°C when SFP+ transceivers are installed Operating relative humidity: 15% to 95% @ 104°F (40°C), noncondensing Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C) Nonoperating/Storage relative humidity: 15% to 90% @ 149°F (65°C), noncondensing Altitude: up to 10,000 ft (3 km) Acoustic: Power: 34 dB, Pressure: 24.5 dB Electrical characteristics Frequency: 50/60 Hz Maximum heat dissipatio: 635 BTU/hr (669.93 kJ/hr) AC voltage: 100 - 127 / 200 - 240 VAC Current: 6/3 A Maximum power rating: 186 W Idle power : 74 W Safety EN 60950/IEC 60950UL 60950CAN/CSA 22.2 No. 60950EN 60825

THIS PRODUCT IS REFURBISHED
We take great pride in the Refurbished Products we carry on our Website. All Refurbished Products are Grade A Quality, which means they will arrive in cosmetically pristine condition. Each unit undergoes a rigorous refurbishment process in which each unit is tested in all facets and restored to a like-new state. Refurbished products are warranted by either the original manufacturer or the manufacturer’s third party refurbisher. Consider purchasing an extended service plan if you desire even more coverage.

Additional Resources: Product Manuals

 
  • Manufactured by: HPE
    Warranty provided by: HPE
    UPC No: 0887111285966
    Mfg Part No: J9586AR
  • Box Size: ( Length:0, Width:0, Depth:0)
    Shipping Weight: 1.0000 pound(s)
    Click here for full warranty and support information
  • HPE logos are registered trademarks of HPE. All others trademarks and copyrights mentioned herein are the property of their respective owners.
Plus get insider deals first, exclusive promotions and more!
 
Sponsored by: