HPE 5412-92G-PoE+-2XG v2 zl Switch - Switch - L4
Price: $10,35999
ADD TO CART
HPE 5412-92G-PoE+-2XG v2 zl Switch - Switch - L4
  1. ADD TO CART
  2. Save to wishlist

HPE 5412-92G-PoE+-2XG v2 zl Switch - Switch - L4 - managed - 92 x 10/100/1000 (PoE) + 2 x SFP+ - rack-mountable - PoE - remarketed - with HP 5400 zl Switch Premium License (J9532AR)

Item#:  13160699  | Model#: J9532AR  | Quality Refurbished
Price:
$10,359.99
Shipping:
Temporarily out of stock. Order today and we'll deliver when available. (Details)

Additional Resources

HPE 5412-92G-PoE+-2XG v2 zl Switch - Switch - L4 Product Details

The HP 5400 zl Switch Series consists of advanced intelligent switches in the HP modular chassis product line, which includes 6-slot and 12-slot chassis and associated zl modules and bundles. The foundation for the switch series is a purpose-built, programmable ProVision ASIC that allows the most demanding networking features, such as Quality of Service (QoS) and security, to be implemented in a scalable yet granular fashion. With 10/100, Gigabit Ethernet, and 10 Gigabit Ethernet interfaces; choice of PoE+ and non-PoE; integrated Layer 3 features; and HP AllianceOne solutions, the 5400 zl switch series offers excellent investment protection, flexibility, and scalability, as well as ease of deployment, operation, and maintenance. Software-defined networking
  • OpenFlow --- supports OpenFlow 1.0 and 1.3 specifications to enable SDN by allowing separation of the data (packet forwarding) and control (routing decision) paths
Quality of Service (QoS)
  • Advanced classifier-based QoS --- classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis
  • Layer 4 prioritization --- enables prioritization based on TCP/UDP port numbers
  • Traffic prioritization --- allows real-time traffic classification into eight priority levels mapped to eight queues
  • Bandwidth shaping ---
    • Port-based rate limiting --- provides per-port ingress-/egress-enforced increased bandwidth
    • Classifier-based rate limiting --- uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port
    • Reduced bandwidth --- provides per-port, per-queue egress-based reduced bandwidth
  • Class of Service (CoS) --- sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
Management
  • Remote intelligent mirroring --- mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HP 8200 zl, 6600, 6200 yl, 5400 zl, or 3500 Switch located anywhere on the network
  • RMON, XRMON, and sFlow v5 --- provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP) --- advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
  • Uni-Directional Link Detection (UDLD) --- monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional link into a unidirectional one; this prevents network problems such as loops
  • Management simplicity --- provides common software features and CLI implementation across all HP ProVision-based switches (including the zl and yl switches)
  • Command authorization --- leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; an audit trail documents activity
  • Friendly port names --- allows assignment of descriptive names to ports
  • Dual flash images --- provides independent primary and secondary operating system files for backup while upgrading
  • Multiple configuration files --- stores easily to the flash image
  • Comware CLI ---
    • Comware-compatible CLI --- bridges the experience of HP Comware CLI users who are using the HP ProVision software CLI
    • Display and fundamental Comware CLI commands --- are embedded in the switch CLI as native commands; display output is formatted as on Comware-based switches, and fundamental commands provide a Comware-familiar initial switch setup
    • Configuration Comware CLI commands --- when Comware commands are entered, CLI help is elicited to formulate the correct ProVision software CLI command
Connectivity
  • IEEE 802.3az Energy Efficient Ethernet --- lowers power consumption in periods of low link usage (supported on v2 zl 10/100/1000 and 10/100 modules)
  • IEEE 802.3af Power over Ethernet (PoE) --- provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras
  • IEEE 802.3at Power over Ethernet Plus --- provides up to 30 W per port to IEEE 802.3 for PoE- and PoE+-powered devices, such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/zoom/tilt security cameras
  • Prestandard PoE support --- detects and provides power to prestandard PoE devices
  • High-density port connectivity --- provides up to 12 interface module slots and up to 288 wire-speed 10/100/1000 PoE-enabled ports or 96 10-GbE ports per system
  • Jumbo frames --- on Gigabit Ethernet and 10-Gigabit Ethernet ports, jumbo frames allow high-performance remote backup and disaster-recovery services
  • Auto-MDIX --- provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
  • IPv6 ---
    • IPv6 host --- enables switches to be managed in an IPv6 network
    • Dual stack (IPv4 and IPv6) --- transitions from IPv4 to IPv6, supporting connectivity for both protocols
    • MLD snooping --- forwards IPv6 multicast traffic to the appropriate interface
    • IPv6 ACL/QoS --- supports ACL and QoS for IPv6 network traffic
    • IPv6 routing --- supports static and OSPFv3 routing protocols
    • 6in4 tunneling --- supports encapsulation of IPv6 traffic in IPv4 packets
Performance
  • High-speed, high-capacity architecture --- 1 Tbps crossbar switching fabric provides intra-module and inter-module switching with 585.6 million pps throughput on the purpose-built ProVision ASICs
  • Selectable queue configurations --- allows for increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications
Specifications Ports 92 RJ-45 autosensing 10/100/1000 PoE+ ports Media Type: Auto-MDIX Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+) 2 open 10GbE SFP+ transceiver slots 8 open module slots Supports a maximum of 66 10GbE ports or 284 autosensing 10/100/1000 ports or 194 mini-GBICs, or a combination Memory and processor Gigabit module: ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM 10G module: ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM Management module: Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM Mounting Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); horizontal surface mounting only Performance 1000 Mb Latency: < 3.7 µs (FIFO 64-byte packets) 10 Gbps Latency: < 2.1 µs (FIFO 64-byte packets) Throughput: up to 564.2 Mpps Routing/Switching capacity: 758.4 Gb/s Switch fabric speed: 758.4 Gb/s Routing table size: 10000 entries (IPv4), 5000 entries (IPv6) MAC address table size: 64000 entries Environment Operating temperature: 32°F to 131°F (0°C to 55°C); 0°C to 40°C with J8706A or J8707A modules installed Operating relative humidity: 15% to 95% @ 131°F (55°C), noncondensing Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C) Nonoperating/Storage relative humidity: 15% to 95% @ 149°F (65°C), noncondensing Altitude: up to 10,000 ft (3 km) Acoustic: Power: 64 dB, Pressure: 57.5 dB ISO 7779, ISO 9296 Safety CSA 22.2 No. 60950UL 60950IEC 60950EN 60950

THIS PRODUCT IS REFURBISHED
We take great pride in the Refurbished Products we carry on our Website. All Refurbished Products are Grade A Quality, which means they will arrive in cosmetically pristine condition. Each unit undergoes a rigorous refurbishment process in which each unit is tested in all facets and restored to a like-new state. Refurbished products are warranted by either the original manufacturer or the manufacturer’s third party refurbisher. Consider purchasing an extended service plan if you desire even more coverage.

Additional Resources: Product Manuals

 
  • Manufactured by: HPE
    Warranty provided by: HPE
    UPC No: 0886111516346
    Mfg Part No: J9532AR
  • Box Size: ( Length:0, Width:0, Depth:0)
    Shipping Weight: 87.9000 pound(s)
    Click here for full warranty and support information
  • HPE logos are registered trademarks of HPE. All others trademarks and copyrights mentioned herein are the property of their respective owners.
Plus get insider deals first, exclusive promotions and more!
 
Sponsored by: