Hauppauge 166 Product Details
Video Capture Board with Live Overlay
The ImpactVCB board provides image capture from a desk top CCD camera or other analog input. Impact VCB board is a small 1/3 height PCI board based on the Conexant 878A video digitizer chip. It requires a bus-master PCI slot. A VGA card with Direct Draw 3 (or later) capability is required for Live Display. Operating system can be Window 95, Windows 98, WindowsME, NT 4.0, Windows 2000 and WindowsXP. Third party Linux drivers are available. Drivers are provided with the ImpactVCB board. Incoming image is digitized using high quality 4:2:2 video sampling and displayed in a window on the PC's VGA screen. The image is transmitted directly by the ImpactVCB into main system memory or the memory of the VGA adapter for high performance results.
The ImpactVCB comes in several different I/O configurations, with up to four composite video inputs, s-video input, power output (primarily to drive a CCD camera) and an optional audio input.
A Programmers Toolkit is available for the ImpactVCB which provides both DLL and OCX support for applications requiring the ImpactVCB's video capture or video display. Applications can be developed in C or Visual Basic.
- Composite Video Inputs: 3
- S-Video Inputs: 1
- Video Capture
Video from any analog source (composite or S-Video) can be captured as either still frame video images or motion video. Composite video inputs are provided as female RCA jacks, while S-Video uses standard 4-pin DIN connectors. The ImpactVCB comes with a VFW capture driver (Video for Windows)for Windows 95 and Windows NT, and a WDM driver for use with WindowsXP, Windows98SE, Windows Me and Windows 2000. Typical capture rates range from 15 to 30 fps depending on system configuration.
- Live Video Display
The ImpactVCB can display live video from NTSC or PAL video sources in a resizable window on the PC screen. The digitizing of the analog video signal and the resizing of the video image is performed by hardware on the ImpactVCB, thereby not slowing down the CPU. After video is digitized and resized, the digitized video image is drawn by the ImpactVCB directly into the memory of the PC's VGA card. This uses a feature of Windows called Direct Draw, and the ImpactVCB can be used with most VGA cards which support Direct Draw 5 or higher. This technique is used on Windows95, Windows98, WindowsME, Windows2000 and WindowsNT 4.0
Some ImpactVCB models have a unique serial number burnt into an EProm on board. The serial number is read either through the Hauppauge WinTV Programmers Toolkit or can be read via Windows Control Panel. In addition to the serial number, these models of ImpactVCB have its I/O configuration burnt into the EProm.
Minimum System Requirements
The ImpactVCB capture board is designed for all Pentium PCs running WindowsXP, WindowsME, Windows2000, Windows 95, Windows98, and Windows NT 4.0 with Service Pack 3 installed. A public domain Linux driver is also available for the ImpactVCB.
- Audio Capture
Audio is not processed on the board. Audio can be input directly to the sound card for digitizing and furthur processing.
The ImpactVCB can be used for Internet video conferencing using the supplied Microsoft NetMeeting. Also, most other video conferencing applications which require a Video for Windows capture driver to digitize video can be used with the ImpactVCB. Since all of the digitizing and image movement are done by the ImpactVCB without requiring the systems CPU, you get the maximum performance from your PC.
- Hardware Required for Videoconferencing
In addition to the ImpactVCB, a video camera, NTSC or PAL (power is available from the board or optional AC power adapter), is required. A 16 bit, 8 KHZ full duplex codec sound card is required for digitizing the audio. A microphone and speakers are also required.
Manufactured by: Hauppauge
Warranty provided by: Hauppauge
Mfg Part No: 166
UPC No: 785428001661
Box Size: ( Length:7, Width:11, Depth:3)
Shipping Weight: 0.4000 pound(s)
Dimensional Weight: 2pounds
What is Dimensional weight?
Click here for full warranty and support information
- Limited Warranty: A full text version of the limited warranty
may be obtained by mailing a self addressed, stamped envelope to the
address below and requesting the warranty for item number: H56-2026
7795 W. Flagler St. Suite 35
Miami, FL. 33144
- Hauppauge logos are registered trademarks of Hauppauge. All others trademarks and copyrights mentioned herein are the property of their respective owners.