Black Box Pro Switching System NBS Fiber Multimode Product Details
With the Pro Switching System 1U NBS, it's very simple to switch all users from a main network to a backup network. Locally, this is done using a momentary toggle switch on the chassis' front or from a serial RS-232 workstation. But it also supports control from a remote workstation via its 10BASE-T Ethernet port. Through this TCP/IP connection, you can switch and monitor circuits using Telnet, SNMP, or a web browser link.
The switching system also features auto bypass and auto recovery functions. If the "normal" network paths between the chassis and the device being monitored go down for any reason, the chassis will automatically switch from the normal connection state to the bypass, or failover, connection state.
Unique latching optical switch mechanisms and micro-mirrors optically route signals between ports. And because the system is fiber based, there's no need to worry about EMI/RFI interfering with signaling in electronically noisy applications.
The system uses duplex SC connections for each channel (port) to form bidirectional data paths to your 62.5/125-m multimode network segments. Simply connect fiber cables between the system's circuits and the network connections you want to control. As soon as the fiber cables are plugged into the chassis, the selected data paths become active.
Each switching circuit has a common (C) port that's latched to its associated A or B port, which means it transmits signals even if the chassis is without AC power. Because its relays are physically latched into position, once a position is set, it stays set. A key-lockable switch secures the gang switching function. With the key-lock switch in the enabled position, all ports in the Pro Switching System 1U NBS can be simultaneously switched by pressing the momentary toggle switch on the chassis' front.
Device Type: Switch - managed - cascadable
Enclosure Type: Rack-mountable - 1U
Subtype: Gigabit Ethernet
Max Units In A Stack: 255
Remote Management Protocol: SNMP, Telnet
Features: Built-in DIP switch
Status Indicators: Port status, power
Expansion / Connectivity
Interfaces: 1 x management - RJ-45 ¦ 1 x serial (RS-232) - DB-9 - management ¦ 2 x cascading - RJ-11 ¦ 6 x - SC multi-mode x 2 ¦ 6 x - SC multi-mode x 2 ¦ 6 x - SC multi-mode x 2 - backup
Power Device: External power adapter
Installed Qty: 2
Power Redundancy: Yes
Voltage Required: AC 120 V ( 60 Hz )
Cables Included: 1 x patch cable
MTBF: 1,300,000 hours
Compliant Standards: RoHS
TAA Compliant: Yes
Dimensions & Weight
Width: 17.2 in
Depth: 10.5 in
Height: 1.7 in
Weight: 5.07 lbs
Service & Support: 1 year warranty
Service & Support Details: Limited warranty - 1 year
Min Operating Temperature: 32 °F
Max Operating Temperature: 104 °F
Humidity Range Operating: 0 - 95% (non-condensing)
Min Storage Temperature: -4 °F
Max Storage Temperature: 158 °F
Manufactured by: Black Box Corporation
Warranty provided by: Black Box Corporation
Mfg Part No: NBS006MA
( Length:0, Width:0, Depth:0)
Shipping Weight: 8.8800 pound(s)
Click here for full warranty and support information
- Black Box Corporation logos are registered trademarks of Black Box Corporation. All others trademarks and copyrights mentioned herein are the property of their respective owners.