D-Link Wireless N Unified Access Point DWL-3600AP - Wireless access point - 802.11b/g/nItem#: YYD1-DWL3600AP  |  Model#: DWL-3600AP

The DWL-3600AP is a business 802.11n Wi-Fi Access Point. Easy to manage and capable of high data transmission speeds, the DWL-3600AP integrates seamlessly into any existing network infrastructures and can be easily scaled up to meet future demands.

The DWL-3600AP's 2x2 MIMO 2.4GHz radio delivers up to 300 Mbps1 of network throughput. In addition, the DWL-3600AP features RadioProtect technology, which ensures all users receive an adequate level of service even in an environment where many users are accessing the network through legacy 802.11b and 802.11g devices.

The DWL-3600APs self-configuring cluster makes it is the ideal solution for small businesses that need to deploy multiple Access Points but lack the resources to tackle the complicated task of network management. When a small number of DWL-3600APs is deployed on the network, they may be configured to form a self-configuring cluster. Once the administrator configures the master Access Point, the same configuration can then be applied to all remaining APs. Up to 16 Access points may be used to form a cluster.

When deployed in conjunction with D-Link's DWC-1000 Wireless Controller, up to 24 DWL-3600AP units can be centrally managed and provisioned, thus enabling the administrator to scale up the Wi-Fi network to cover a very large area.

The DWL-3600AP supports the latest standards in Wi-Fi security, including WPA, WPA2, and 802.1x. In addition, the DWL-3600AP supports up to 16 Virtual Access Points (VAP), which allows the administrator to assign different access privileges to different groups of users. When used together with D-Link's Wireless Controller, security can be raised to a new level. Rogue APs in the network can be easily detected, and the administrator will be immediately notified of any security threat.

When a number of Access Points are deployed close to each other, interference may result if proper RF management is not implemented. When a DWL-3600AP senses a neighbor nearby, it will automatically select a non-interfering channel. This greatly reduces RF interference and allows the administrator to deploy APs more densely. To further minimize interference, when a nearby AP is operating on the same channel, the DWL-3600AP will automatically lower its transmission power. When, for whatever reason, the nearby AP is no longer present, the DWL-3600AP will increase its transmit power to expand coverage.

The DWL-3600AP is WMM-certified, so in the event of network congestion, time-sensitive traffic can be given priority ahead of the rest of traffic. Furthermore, when a number of DWL-3600APs are in close proximity with each other, an Access Point will refuse new association requests once its resources are fully utilized. Instead, the association request will be picked up by a neighboring unit. This feature ensures that no single AP is overburdened while others nearby sit idle.

Specifications

General
   Device Type:  Wireless access point
   Width:  8 in
   Depth:  8 in
   Height:  1.9 in
   Weight:  1.4 lbs

Processor / Memory / Storage
   Hard Drive:  None.

Networking
   Form Factor:  External
   Connectivity Technology:  Wireless
   Data Transfer Rate:  300 Mbps
   Data Link Protocol:  IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
   Remote Management Protocol:  SNMP, Telnet, HTTP, HTTPS
   Frequency Band:  2.4 GHz
   Status Indicators:  Power, WLAN, LAN
   Features:  128-bit encryption, 64-bit encryption, power over Ethernet (PoE), load balancing, VLAN support, MAC address filtering, Wireless Distribution System (WDS) support, MIMO technology, Wi-Fi Multimedia (WMM) support, SpectraLink Voice Priority (SVP) support, Quality of Service (QoS), Multiple SSID support, rogue access point detection
   Encryption Algorithm:  128-bit WEP, 64-bit WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise
   Compliant Standards:  IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.11b, IEEE 802.3af, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n

Antenna
   Antenna:  Internal integrated
   Antenna Qty:  1
   Directivity:  Omni-directional
   Gain Level:  4.7 dBi

Expansion / Connectivity
   Interfaces:  1 x network / power - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 ¦ 1 x management - console - RJ-45

Miscellaneous
   Compliant Standards:  FCC

Power
   Power Over Ethernet (PoE) Supported:  PoE
   Power Device:  Power adapter - external
   Power Consumption Operational:  8 Watt

Environmental Parameters
   Min Operating Temperature:  32 °F
   Max Operating Temperature:  104 °F
   Humidity Range Operating:  10 - 90% (non-condensing)