Omnitron miConverter GX/T - Fiber media converter - Ethernet, Fast Ethernet, Gigabit Ethernet - 10Base-T, 100Base-TX, 1000Base-T, 1000Base-X - RJ-45 / ST multi-mode - up to 7.5 miles - 1310 nmItem#: 9830228 | Model#: 1221-1-1Z
- Temporarily out of stock. Order today and we'll deliver when available. (Details)
Omnitron miConverter GX/T - fiber media converter Product Details
The GX/T features Small Form Pluggable (SFP) transceivers that support 1000BASE-X for interoperability with Gigabit fiber equipment. SFP transceivers enable adaptability to different fiber types, speed and distances, and support Coarse Wave Division Multiplexing (CWDM) technology to increase the bandwidth capacity of fiber infrastructure.
The GX/T also supports SC and ST fixed fiber connectors for multimode, single-mode fiber; and single mode single-fiber models are available.
The Plug-and-Play capability of the miConverter GX/T simplifies fiber-to-the-laptop and fiber-to-the-desktop deployments. Both the fiber port and the UTP port support auto-negotiation, an IEEE standard which defines how all the communicating devices automatically perform their configuration functions. Auto-negotiation achieves the best possible mode of operation (speed, duplex mode and pause mode) between the devices.
The auto-negotiation feature can be disabled on both ports (for manual configuration) using DIP-switches on the module. This is useful in a situation where the GX/T is connected to a non-negotiating device and the configuration parameters must be set manually.
Network flow control is managed by the pause function (configured via auto-negotiation or manually) that prevents network congestion on both the UTP and fiber ports. When pause is enabled and the device is experiencing network congestion, it will send out a Pause signal to its link partner, instructing it to slow down data transmission.
The GX/T generates a remote fault indication when it detects link fault conditions and reports detection of these signals by displaying status on the LED. Through user DIP-switch configuration, the detection of these indicators or link modes can also be propagated to the other port on the GX/T as a means of notifying connected end-devices of the link fault.
Diagnostic data is provided through LED indicators that assist in network installation and maintenance. The LEDs report the availability of power, port activity and link status and speed.
The miConverter GX/T combines Gigabit Ethernet connectivity with the lightweight design and low-power consumption required for both permanent deployment and mobile service networks.
Device Type: Fiber media converter
Form Factor: External
Localization: United States
Connectivity Technology: Wired
Cabling Type: 10Base-T, 100Base-TX, 1000Base-T, 1000Base-X
Data Link Protocol: Ethernet, Fast Ethernet, Gigabit Ethernet
Data Transfer Rate: 1 Gbps
Optical Wave Length: 1310 nm
Max Transfer Distance: 7.5 miles
Status Indicators: Link activity, port transmission speed, power
Features: CWDM, auto-negotiation, wall mountable, Jumbo Frames support, built-in DIP switch
Compliant Standards: IEEE 802.3u, IEEE 802.3i, IEEE 802.3ab
Expansion / Connectivity
Interfaces: 1 x Ethernet 1000Base-X - ST multi-mode female x 2 ¦ 1 x Ethernet 1000Base-T - RJ-45 female
MTBF: 250,000 hours
Compliant Standards: Plug and Play, FCC Class A certified, UL
Power Device: External power adapter
Voltage Required: AC 120 V ( 60 Hz )
Dimensions & Weight
Width: 1.7 in
Depth: 4.1 in
Height: 0.8 in
Weight: 4.94 oz
Service & Support: Limited warranty - lifetime
Min Operating Temperature: -40 °F
Max Operating Temperature: 167 °F
Humidity Range Operating: 5 - 95%
Manufactured by: Omnitron Systems
Warranty provided by: Omnitron Systems
UPC No: 0800975029101
Mfg Part No: 1221-1-1Z
( Length:0, Width:0, Depth:0)
Shipping Weight: 1.2000 pound(s)
Click here for full warranty and support information
- Omnitron Systems logos are registered trademarks of Omnitron Systems. All others trademarks and copyrights mentioned herein are the property of their respective owners.