CTG Audio FS-400 Control Consoles Beam Forming
Price: $1,14799
ADD TO CART
CTG Audio FS-400 Control Consoles Beam Forming
  1. ADD TO CART
  2. Save to wishlist

CTG Audio FS-400 Control Consoles Beam Forming (FS-400)

Item#:  8979890  | Model#: FS-400
Price:
$1,147.99
Shipping:
Temporarily out of stock. Order today and we'll deliver when available. (Details)

CTG Audio FS-400 Control Consoles Beam Forming Product Details

Using multiple microphones, this mixer calculates the direction and source of every sound in a room. It can determine if a sound is speech or noise. By measuring the difference in time and intensity of the speech in each microphone, the mixer effectively forms a beam aimed at the person speaking and adaptively follows that person as they move about the room. Constantly monitoring each microphone in real time, acoustic information is added from microphones that do not appear in other microphones. An additional De-Reverberation sensor eliminates room reverberations such as voices reflecting off of walls. The result is a degree of voice clarity and intelligibility unprecedented in the past. CTG offers two versions of the Beam Forming Mixer. The FS-400 has four microphone inputs with independent Echo and Noise Cancellation on each microphone, plus an additional De-Reverberation Echo Canceller. The FS-800 offers eight Microphone inputs with both Echo and Noise Cancellation for each microphone, plus an additional De-Reverberation Echo Canceller for every four microphones. Each Mixer can be daisy chained to additional mixers to support an unlimited number of microphones. Every unit can be either master or slave. Microphones may be installed in the ceiling, walls or on tables. An included telephone line (PSTN) add and an included wired remote dialer or soft dialer will turn either mixer into a self contained audio teleconferencing system, and line level output and input connections will allow connection to a video codec for video teleconferencing. Used with CTG CM-01 Ceiling Microphone, or the TM-01 and TM-02 table top or table implant microphones, high quality conferencing can be available even in many rooms previously considered acoustically unsuitable. Front panel of FS-400 ^^ Power on/off Switch with LED indicator ^^ USB mini B: Used for PC Communication, both audio and setup ^^ Dialer: Input for dial pad to dial, connect and disconnect calls ^^ Phone Line: Input (standard RJ11) to connect phone line from wall plate Back panel of FS-400 ^^ Microphone inputs (1-4): CTG ceiling microphones, table microphones, or implant microphones are connected here. ^^ Speaker In (mandatory): This is the return audio from the video codec ^^ Output: This output is connected to a line level input of the video codec ^^ Speaker Out: This will be connected to the speaker amplifier ^^ Link Up: This is an expansion port which allows multiple units to be linked together and function as one system for large rooms. ^^ Link Down: This is an expansion port which allows multiple units to be linked together and function as one system for large rooms. ^^ Power Connector: USB: Power supply through USB mini B @ 5 V DC automatically adjusts to 110 to 240 volt mains. Specifications: Microphone Inputs ^^ Number of inputs: 4 ^^ Type: Phantom powered balanced Input ^^ Connector: Phoenix Balanced ^^ Phantom Voltage: 24 Volt ^^ Input Impedance (load): 590 ohm ^^ Maximum input level: 60 mVpp (input gain 30) ^^ Frequency response: 20 Hz - 8 KHz ^^ Mic requirements: Microphone sensitivity to fall between -31 and -45 dB re 1V at 1Pa If more sensitive mics are required please contact CTG Speaker Input ^^ Type: Balanced Input (single ended can also be implemented by connecting the negative input to GND) ^^ Connector: Phoenix Balanced ^^ Input Impedance: 5 K ohm ^^ Maximum input level: 2 Vpp ^^ Frequency response: 20 Hz - 8 KHz Speaker Output ^^ Type: Differential ^^ Connector: Phoenix Balanced ^^ Maximum output level: 2 Vpp ^^ Output Impedance: <60 ohm ^^ Frequency response: 20 Hz - 8 KHz ^^ THD+N: <-50dB ^^ Dynamic range: 90 dB
 
  • Manufactured by: CTG Audio
    UPC No:
    Mfg Part No: FS-400
  • Box Size: ( Length:0, Width:0, Depth:0)
    Shipping Weight: 1.0000 pound(s)
    Click here for full warranty and support information
  • CTG Audio logos are registered trademarks of CTG Audio. All others trademarks and copyrights mentioned herein are the property of their respective owners.
Plus get insider deals first, exclusive promotions and more!
 
Sponsored by: